How to mix the material

Before the beginning of work, place a component A into a warm place for 24 hours (for example, near to radiator). This will facilitate the mixing process. The thick component A must be mixed thoroughly with the liquid component B. Pour the entire component B into the bucket with component A. To mix use a wooden stick from the kit. Stir for 10 minutes. Pay special attention to the sides and bottom of the bucket to make sure that there is no remains of unmixed material on them. Then, in 5 minutes, mix the material again for 2 minutes. Thereafter, the material is ready for application. For additional information, please see the video how to mix the material.
Back to blog